Anúncios Postagem de Compra na subcategoria UPS-Baterias-Fontes Alimentação em Elétrica e Eletrónica de Canadá

I have two ups project. Please contac me t by email to sales@m*****.com for more details.

are you selling electronic components Electromechanical Power Supplies DC/DC Power Supplies VOF-85-12

we are looking for a quotation of sub station equipments to Iraq

1.- LUMINAIRE UNIT WITH LED TECHNOLOGY 150-170W ( quantity:10,000) LUMINARY • BRAND: INDICATE • MODEL OF THE LED TECHNOLOGY LUMINAIRE: INDICATE • ORIGIN: INDICATE • NOMINAL POWER OF THE LED LUMINAIRE: IT MUST BE IN THE RANGE OF 150 - 170W • POWER FACTOR OF THE ASSEMBLY OF THE LED LUMINAIRE: ≥ 0.95 • WEIGHT OF THE LED LUMINAIRE: ≤ 12 KG (may vary) • THE OPTICAL AND ELECTRICAL BLOCK: THEY SHOULD BE IN SEPARATE COMPARTMENTS, SHARING THE SAME CASE. • THE FIXING SYSTEM OF THE LED LUMINAIRE MUST HAVE ELEMENTS WITH HIGH OXIDATION RESISTANCE, SUITABLE FOR OUTDOOR INSTALLATION. • FIXING ON METAL TUBES WITH AN EXTERNAL DIAMETER OF: LESS THAN OR EQUAL TO 48.33 MM UP TO GREATER THAN OR EQUAL TO 60.3 MM. AND WHERE APPROPRIATE, WASHERS, GALVANIZED OR ZINC PLATED. • TILT ANGLE THAT IS ADJUSTABLE ON SITE FOR BOTH POST-TOP (0 TO +15°) AND SIDE ENTRY (0 TO -15°) ASSEMBLY IN 5° STEPS. • IMPACT RESISTANCE INDEX: ≥ IK 08; IN ACCORDANCE WITH THE UNE-EN 62262 STANDARD OR ITS EQUIVALENTS • TIGHTNESS OF THE OPTICAL BLOCK: ≥ IP 66; IN ACCORDANCE WITH THE IEC 60598 STANDARD OR ITS EQUIVALENT ACCORDING TO THE ORIGIN OF THE LUMINAIRE. • THE MODEL OF THE LUMINAIRE SHOULD HAVE SEALING ON THE BODY IN LOW OR HIGH RELIEF MADE IN THE FACTORY, STICKERS OR OVERLAPPED PLATES WILL NOT BE ACCEPTED.

We need VARTA Batteries (AGM) Type in 50 pieces each, if you can supply them with reasonable prices, please do not hesitate to contact us, we would be happy to have a partnership with the best suppliers.

looking for a good power bank battery with charger

The contractor shall also supply and install an Uninterruptable Power