Molumer Yapi Kimyasallari A. S.

PL05N-01 / UV FILTERED , ELASTOMERIC WATERPROOFING TECHNICAL DATA SHEET PRODUCT DESCRIPTION Polyester is acrylic based, copolymer, high viscosity, UV filtered elastomeric liquid plastic waterproofing material. USING AREAS - Chimney, parabet and pipe bottoms - Sheet, trapezoid, triphone screw heads, atermite, PVC, wooden surfaces and joints - On paved surfaces - On terraces over reinforced concrete and screed - Hidden roofs, stream gutters - Used in mosque domes. ADVANTAGES - The expansion ability of the layer formed after drying is high. - It has resistance to UV rays. - Elastic. - It has the ability to adhere to the surface and diffusion. - Walkable on. - Ready to apply directly. SURFACE PREPARATION - Before starting the application, it should be cleaned from all kinds of dirt, dust, oil, weak and playful particles, shield, old applications that swell, cement sorbet on the surface. - Tools such as vacuum cleaners, brushes, spatulas can be used according to the cleaning required on the surface. - The surface must be primed or leveled so that a solid surface is obtained. - Surface repairs, filling of gaps and pits should be done with Repair-Protection mortar. It should not be applied to surfaces that are wet, damp and may have water accumulation. REFERENCE STANDARDS TS EN 1504-2: 2008-04 Products and Systems for the Protection and Repair of Concrete Structures Fair No: 10.300.2174 - 15.270.1001 - 15.270.1002 - 15.270.1003 - 15.270.1004 APPLICATION CONDITIONS Protect the newly applied material from frost and rain. Application should be carried out after waiting at least 21 days in new screeds. However, in the screeds thrown with Molumer Concrete Additives, the application can be made after 7-10 days depending on the air temperature. Surface and ambient temperature : Minimum +5 °C Maximum +35°C Standby time between floors : ~12 hours at +10 °C ~6 hours at +20 °C ~4 hours at +30 °C CONSUMPTION Consumption varies according to surface condition, application thickness, losses such as spillage and voiding. Average Consumption 1,65 – 2,75 kg/m2 First layer Consumption ~700 gr/m2 Second floor Consumption ~700 gr/m2 Third layer Consumption ~600 gr/m2 APPLICATION - Surfaces such as dusty, burnt, moss-repelled concrete and screed are primed with Molumer PL03 or PL302. A carrier mesh is laid on the drying surface and Molumer PL05N-01 is applied on it. - Molumer Geo Chamfer Band is laid on surfaces such as PVC, wood and ceramic with old water-based insulation and Molumer PL05N-01 is applied. - It can be mixed with a low-speed (up to 500 rpm) mechanical mixer in the package. - Mixing time is at least 2 minutes. APPLICATION EQUIPMENTS - Only the insulation brush is used in the application. - The tools and equipment used should be cleaned with water and thinner. Molumer PL 05N-01 can only be mechanically cleaned from the surface after drying and hardening. SAFETY ADVICE During the application, work clothes, protective gloves, glasses and a mask should be used in accordance with the rules of occupational and occupational health. Eyes and if it splashes on the skin, immediately wash it off with clean water. Jul. In case of ingestion, a doctor should be consulted immediately. Your children it should be stored out of their reach. Contact Molumer for the material safety form (MSDS) for the products. - Color: White - Can be colored in the desired color, preferably with water-based color pigments. - pH: 9±1 - Density: 1.30±0.05 kg/l - Packing Shape: 3.5kg – 10kg - 20kg plastic bucket - Viscosity: 12000±4000 mPas STORAGE - It should be stacked and stored in a cool and dry environment, no more than 2 pieces in a row, protecting it from direct sunlight and frost. If the entire product cannot be used, the bucket lid should be tightly closed for the next use and the product should be prevented from breathing. The storage life is 1 year from the date of manufacture. LEGAL NOTES The information provided about all Molumer products, recommendations on their application and use; The experience we have about the cases where the products are stored, protected and applied correctly has been given with knowledge, experience and good faith. Molumer products provide users with assurance against manufacturing errors. This assurance is aimed at product quality. The application surfaces and application areas of these products are diverse. Therefore, when using Molumer products, make sure that you apply the right product in the right conditions, in the right way and in the right place. Molumer is not responsible for any damages that may occur otherwise and for application errors caused by lack of information. The owner, representative or contractor is responsible for checking the suitability of the products for their intended use. It is the responsibility of the users to ensure that the Jul Product information files are up to date. For this reason, users should take into account the publication date, revision number and revision date on the product files. The recently published product portfolio and catalogs override the previous ones. You can visit our website for the current file. There may be tonal differences between production batches for the colored products. PL05N-01 / UV FILTERED, ELASTOMERIC WATERPROOFING MATERIAL SAFETY DATA SHEET ( MSDS ) Has been prepared in accordance with the Directive 91/155 / EC of the European Union and its amendments (93/112 / EC, 2001/58 / EC) and the Communiqué on Procedures and Principles for the Preparation of Safety Data Sheets numbered 24692 on 11/03/2002. 1. DEFINITION OF PRODUCTS AND COMPANIES Product Name: MOLUMER PL05N-01- High UV Resistant, Elastomeric Resin Based Waterproofing Areas of Usage: Chimney, parapets and pipe on the floor, Sheet metals, trapeze, trifonl screw heads, eternit sheets, PVC, on wooden surfaces and joints, On asphalt surfaces, On concrete and screed terraces, Hidden roofs and gutters, Used in mosque domes. Producer Company: Izotas Izolasyon Tur. INDUSTRY AND TRADE LTD. Inonu Mah. Fatih Sultan Cad. No: 40 Ayrancilar Bag / Izmir / Turkey Tel: +902328547113 Fax: +902328547114 Sector giving information about security: R & D Department E-mail address of authorized person: info@molumer.com 2. HAZARDS IDENTIFICATION This assessment is based on information available on similar products. Classification by arrangement (EC) No 1272/2008 • GHS07 Exclamation point • Skin Sens. 1 H317 May cause an allergic skin reaction. Classification according to Directive 67/548 / EEC or Directive 1999/45 / EC • Xi; Irritating • R37 / 38; Irritant to respiratory tract and skin • R41; Risk of eye damage • R43; Increased sensitivity with skin contact • S24 / 25; Avoid contact with eyes and skin. • S20; In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • S37 / 39; Use proper gloves and protect your eyes / face. Other hazards: - 3. COMPOSITION / INFORMATION ON INGREDIENTS Composition: Polyester acrylic resin based copolymer Components Cas-no ECindex-no Classification 67/548 / EEC No acrylic copolymer required Xi; R36 / 38 Quartz 14808-60-7 238-878-4 Not classified Titanium dioxide 13463-67-7 236-675-5 Not classified 4. FIRST AID MEASURES Symptoms and Effects: In any suspicious case or symptom that may occur, medical attention should be sought. In unconscious state, do not give anything by mouth. In case of inhalation: Remove to fresh air, keep warm and at rest. If danger of unconsciousness arises, its position should be protected and medical assistance requested. Eye to Eye: Immediately wash with clean water for 5-10 minutes. Seek medical attention, keeping mouth open. Skin contact: Remove contaminated clothing. Wash the skin with soap and water. Clean with a suitable skin cleanser. Do not use solvent and thinner. Ingestion: If swallowed, seek medical advice immediately. Do not vomit. Rinse with distilled water and sip the water gradually. 5. FIRE FIGHTING MEASURES Fire-fighting measures: Alcohol-resistant foam, carbon dioxide, dry chemical powder, water in mist is recommended. .Do not use water in jets. There is no suitable fire extinguishing equipment. Hazards and Recommendations: Avoid inhalation of gases such as carbon dioxide and carbon monoxide, which are the result of chemical decomposition during combustion. Prevent contamination of wastes transported with water by sewage and soil during fire fighting. 6. ACCIDENTAL AGRICULTURAL PREVENTION Personal precautions, protective equipment and emergency procedures: Remove unnecessary persons from the scene. Breathe in water. Avoid eye and skin contact. Environmental precautions: Prevent from sewer / superficial aquatic / underground water. Methods for cleaning up and taking up: Absorb with liquid-binding material (sand, diatomite, general binder, sawdust). Provide adequate ventilation. 7. USAGE AND STORAGE Safe Handling: Provide adequate ventilation at the place of use. Keep container covers closed when in use. Food and drink are not suitable where the product is used. Secure Storage: There are no special incompatibilities in normal storage conditions. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION The product does not contain significant quantities of substances with limit values that must be controlled and related to the site being studied. Process Conditions: Provide eyewash shop. Technical measures: Provide adequate ventilation. Respiratory apparatus: If ventilation is insufficient, suitable respiratory protection must be present. Hand protection: Protective nitrile or butyl rubber, use long gloves Eye Protection: Use protective eyewear despite liquid splashes. Other protection measures: Protective clothing should be worn. After finishing work, remove contaminated clothing and wash thoroughly with soap and water. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Original is light cream although can be produced as desired color. Preferably can be colored by waterbased color pigments. Odor: Slight acrylic pH: 9 ± 1 Density: 1,30 ± 0,05 kg / lt Viscosity: 12000 ± 4000 omPas Boiling Point: Not Determined Flash Point: Not Specified / Not self-leveling Flammability: Not applicable Explosiveness Feature: No explosion hazard Steam pressure: can not be detected Solubility in Water: Mixable every time Resolution in Oil: Not Detected Distribution Coefficient: Can not be determined Vapor Density: 1 Evaporation Rate: