Wire import companies and wire import trade opportunities Construction and Building

i am owner of company from Serbial i am looking for Turkish supplier for Expanded steel metal mesh i need this mesh 115x40x3mm cca 1600 m2 Please send us an offer for: Expanded steel metal mesh 115x40x3mm Required amount about 1600m2 I need information can we send a cutting sheet so you can cut the boards to the exact measurements we require, or we have to buy standard boards and cut them ourselves? If you have this product in your offer, please let me know the weight per square meter. The stretched metal would be welded into steel frames, but since we have a special request from the customer (see attachment), that only whole rhombuses must be in the frames. I am wondering if with this measure of stretched metal (115x40x3mm) we can get a mesh height of 920mm but keep the whole rhombuses?

We are commercial agents in Egypt,one client govern co asked an offer for 500 tons steel wire rods.

I need the price for a truck of 3 wire strand diameter 9.2mm galvanized steel for prestressed concrete. Following the shutdown of a plant, the market may prove to be buoyant.

We would like to visit you to buy your barbed wire products.

We are looking for one of our clients operating in airport security, wire mesh fence equipment characteristics of rigid welded panels: - In two-layer protection, hot laminated, installed without accessories and cannot be removed, - Made up of double horizontal wires with a diameter of 5 mm and vertical wires with a diameter of 6 mm - Height: 2.00 m minimum - Meshes 200x50 mm, - Manufacturing according to standard NF EN 10 123-7, Characteristics of horizontal and vertical wires: - Tensile strength 500 N/mm², according to standard NF EN 10016 –1/2, - Galvanized/annealed wire coating NF EN 10244-2. Surface finishing : - Preservation of adhesion, - Degreasing, tricathion phosphating, passivation, stoving, - Lamination (electrostatic by thermosetting polyester powder) NF EN 10245-4, - 10 year warranty.

if you have this in your stock or you if you can make this custom GI sheet, please let us know 1. GI Sheet : a. Physical properties: 1. Thickness: (0.38~0.45) mm 2. Weight of roll: ≤ 5000 kg 3. Width of roll: 900-915 mm (GI Sheet must be supplied as roll) 4. Thickness of Zinc coating ≥ 0.015 mm (each side of GI Sheet) 5. Weight of Zinc coating ≥ 0.0225 gm per sq cm 6. Weight:Sheet unit weight according to size and coating 7. The surface of the sheet/roll is smooth, clean and free from all spotsand should have crystallized mild steel- checkered special galvanized layer b. Chemical composition & Mechanical properties: 1. Carbon: 0.15 % Maximum 2. UTS :27~52 kg/mm2 3. Elongation: ≥ 18% 4. Bending Test with standard: ≥ 6 times bending at 90 degree angle. 5. Peeling Test: No peeling at repeated 180 degree bending c. Packing: 1. The G I Sheet should be packed in roll will be wrapped with moisture/water proof paper on the top of the roll to protect moisture/water. After wrapping the roll should be covered with an extra G I Sheet and reinforced in three places with wrap (Two in two end & in middle). The inner & outer edges of the roll should be covered with angular sheet so that the edges of the rolled sheet should not affect for reinforcement. Than the roll to be fastened in lengthwise in four or more places as a required to avoid the looseness of roll. 2. The first sheet of each roll to be labeled with the following marking: (a) Name of manufacturer (b) brand Name (c) group No. (d) dimension and weight of each bundle (e) signature of the technical control department. 3. Galvanized roll can not be transported in any dirty carriages which carries NaCl, Ca(OH)2 and NH4CI. 4. Galvanized roll for delivery should be painted with neutralized mineral oil. 5. A certification is to be provided along with the delivery of each lot showing -name of manufacturer, weight, group No., dimension, results of tests and code No. of this standard. 6. Warrantee for 01 year after acceptance of the stores. d. 1. Country of origin: Group A Country 2. Country of manufacture: Country of Origin 3. Port of Shipment: Country of Origin. Kg 200000 2. GI Wire : Size: Dia 4.00±0.12 mm Technical Requirement: 1. Tensile Strength = 30-50 kg/mm2 2. Elongation= More than 10% 3. Carbon = 0.15-0.25% 4. Wt of Zinc Coating = More than 95 gm/M2 5. There should not have any ungalvanized spot on the surface of the wire. 6. The wire should pass the torsion test Kg 2000

I am looking for coil nails -40mm*2.5mm screw(300*40=180 cartons. -60mm*2.5mm screw(300*30=180 cartons. -80mm*2.5mm screw(225*20=600 cartons

we are looking for gabions manufactory welded

I wanna buy Wire.

We are building an hotel using post-tension system (coated mono strand) unbounded cables 12.7mm with 1860MPa yield strength and I'm looking for 6tons of cables to be shipped to Nigeria -Lagos