Solicitudes de Egipto en la categoría Industria de Plástica y Llanta

I want a price list for importing thermoplastic sheet of all sizes to Egypt

i need the contacts for factories to get qoutations for pp and san for the pp Melting Point °C 160 - 163 Density g mL-1 0.90 - 0.91 (0.905) Coefficient of Thermal Expansion x 10-5 cm / (cm °C) 8.0 - 10 Heat Deflection Temperature, 0.5 MPa °C 78 - 122 Heat Deflection Temperature, 1.8 MPa annealed (unannealed) °C Thermal Conductivity W / mK 0.17 - 0.23 Rockwell Hardness, R Scale n/a R65 - R110 PROPERTY UNIT VALUE / RANGE Tensile Strength, Yield at 23 C MPa 31 - 45 Tensile Strength, Break at 23 C MPa 18 - 22 Elongation, Yield % 10 - 12 Elongation, Break % 50 - 145 Tensile Modulus at 23 C MPa 1950 Other Properties PROPERTY UNIT VALUE / RANGE Processing Temperature °C 200 - 280 Linear Mold Shrinkage cm/cm 0.01 - 0.02 Continuous Service Temperature °C 90 - 120 Electrical Properties PROPERTY UNIT VALUE / RANGE Volume Resistivity Ohm-cm > 1016 Dielectric Strength V/mm x 104 2.3 - 2.5 Dielectric Constant @ 1 MHz n/a 2.1 - 2.6 Dissipation Factor @ 1 MHz n/a 0.0002 - 0.0005 for the abs ABS (Acrylonitrile butadiene styrene)- TDS PROPERTY METRIC UNITS ENGLISH UNITS General Density 1.01e3 - 1.21e3 kg/m^3 63.1 - 75.5 lb/ft^3 Mechanical Yield Strength 1.85e7 - 5.1e7 Pa 2.68 - 7.4 ksi Tensile Strength 2.76e7 - 5.52e7 Pa 4 - 8.01 ksi Elongation 0.015 - 1 % strain 1.5 - 100 % strain Hardness (Vickers) 5.49e7 - 1.5e8 Pa 5.6 - 15.3 HV Fracture Toughness 1.19e6 - 4.29e6 Pa/m^0.5 1.08 - 3.9 ksi/in^0.5 Young's Modulus 1.19e9 - 2.9e9 Pa 0.16 - 0.421 10^6 psi Thermal Max Service Temperature 61.9 - 76.9 °C 143 - 170 °F Insulator or Conductor Insulator Insulator Specific Heat Capability 1.39e3 - 1.92e3 J/kg °C 0.331 - 0.458 BTU/lb. °F Thermal Expansion Coefficient 8.46e-5 - 2.34e-4 strain/°C 47 - 130 µstrain/°F Eco CO2 Footprint 9.1e7 - 1.02e8 kg/kg 3.27 - 3.62 lb/lb Recyclable Yes Yes

Hi need to deal with tpu supplier in turkey

Iam looking for tpu raw material E390

Dear Sir/Madam, I'm looking for TPR (Thermoplastic Rubber Manufacturer) with the following spex : Item Name Description TPR 20% Filler hardness 40 Shore A density 1.012 g/cm³ Tensile strength 1.65 Mpa Melt Flow index 45g/10 min The elongation at break 475% Thanks in advance & best regards