Foam Concrete export companies and foam concrete export trade opportunities Construction and Building

EPS granules supported foam concrete panel for buildings. High performance Thermal and Acoustic insulation. Fire proof. Easy and fast installation 150m2/day with 2 labor. Easy transport 26kg/m2 75 mm tickness

Köpük Beton Katkısı

FM-12 includes four parts, a belt conveyor, a mixer, a pump and a built-in foam generator inside the pump. The equipment is easy to install, dismantle, transport, and construct at site. The equipment has been fully debugged in factory. After assembling the three parts and hose, it is ready to use after plug the power.

FA-4 Foaming Agent The FA-4 foaming agent is a low cost, high quality, and compound cement foaming agent, Best result with flooring. 1. Mainly data 1. Excellent foaming properties, 1 liter foaming agent can make 1.2 to 1.4 cubic meter. 2. Good foam stability, foam half-elimination time is 95 min. 3. Green, non-toxic, tasteless non-corrosive 4. Super-hydrophobic: use the foaming agent, the products have good hydrophobic 5. Little dosage, because of h

FA-3 Foaming Agent 1. Specification Appearance: Light brownish viscous liquid Density: 1.05kg／L PH: 9 Formaldehyde: 0 2. Features 1) FA-3 compound by a wide range of active, and stabilize the foam and other components from composite 2) Density is 35g/L. foam is dry , and low water content 3) Long time storage, non-perishable. general foaming agents can not storage more than six months, the main raw material for FA-3 foaming agent has a

FA-1 Foaming Agent Main performances 1. Better foaming performance, such as massive output and dedicate foam. Foaming performances are tested by Rusi Forth Instrument. Normal foaming agents’ foaming height varies from 100 to 130 millimeter, but FA-1 foaming height reaches 230 millimeters and above. 1 liter foaming agent can froth 1.8-2.3 cubic meters. 2. Fine and stabilized foam; tested by Rusi Forth Instrument, consumption time of half foam is 100 minutes. 3. Non-toxi