Testing Instrument Export RFQ's Testing Instrument Export Companies

We are exploring opportunities for collaboration and believe that a partnership with you could be highly beneficial. We propose manufacturing hemoglobin diagnostic devices and consumables in Iran, leveraging our established production facilities.

Salt Spray Test | Salt Spray Test Chamber Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. The salt fog test chamber meets the following standards: IEC60068-2-11 (GB/T2423.17), GB/T10125, GB/T1771, ISO9227, ASTM-B117, GB/T2423-18, QBT3826, QBT3827, IEC 60068-2-52, ASTM-B368, MIL-STD-202, EIA-364-26, GJB150, DIN50021-75, ISO3768, 3769, 3770; CNS 3627, 3885, 4159, 7669 etc.

The SG61000-5 is an automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) .

The LS9955/LS9956 Automatic Safety Test System (electrical safety analyzer) combined the following function in one set: Withstand Voltage Test (AC/DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Grounding Resistance Test (GR) and Power Test.

SC-015 Dust-proof Test Chamber (Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products under simulated dust climate conditions.

Universal tensile testing tester,Peeling force tester,Fatigue testing tester,Environmental testing chamber.

It is suitable to determine base number of petroleum products and additive.

It is suitable to determine the distillate of engine fuel, solvent oil, and light petroleum products.

he viscometer is designed and made as per the T0619 “Asphalt Kinematic Viscosity Test (Capillary Viscometer Methods” in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. It is suitable to determine kinematic viscosity of asphalt at a certain temperature. Characteristics 1. It mounted with digital temperature controller 2. The temperature controlling precision is up to ±0.01°C. 3. The testing bath is made of hard glass, e

The instrument is designed and made as per the National Standard GB/T265 “Test Methods for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity”. It is suitable to determine kinematic viscosity of liquid petroleum Products (Newton liquid) at a certain temperature. It is also in accord with requirements of SY/T 5651 “Technical Condition for Petroleum Products Kinematic Viscosity Tester”.

The instrument is designed and made as per the National Standard GB/T11143 “Test Methods for Water Content of Liquid Petroleum Products (Karl Fischer Methods)”. It is suitable to determine the water content in the liquid petroleum products and other liquids by titration using Karl Fischer reagent.

The instrument is designed and made as per the National Standard GB/T266 “Test Methods for Engler Viscosity of Petroleum Products”. It is used to determine the ratio obtained by dividing the time of flow, in s, of 200 ml of material using an Engler viscometer at a selected temperature by a factor representing the time of flow, in s, for an equal volume of water at 20 °C. The ratio is the Engler viscosity of the sample.

The instrument is designed and produced as per the international standard ASTM D93 and the national standard GB/T261. It is used to determine the flash point of petroleum products by Pensky-Martens Closed Cup Method. The automated apparatus could be capable of performing the whole procedure, including control of the heating power, stirring of the test specimen, application of the ignition source, detection of the flash point, recording the flash point and printing the test datas.

The instrument is designed and made as per the National Standard GB/T3536 “Test Methods for Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Methods), and T0651 “Asphalt Flash Point and Fire Point Test (Cleveland Open Cup Methods)” in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is used to determine the flash point of petroleum products and bituminous materials, excepting for fuel oil and materials

SYSTEMAK MAKINA TIC. INS. SAN. LTD. STI.