Galvanizing Bath Import Companies List

Currently, we need to have a replacement to the existing kettle, as it has been installed for 7 years. The size of the kettle is 7.00m x 1.2m x 3.2m, and wall thickness is 60mm. It should be ultrasonically tested, automatically electroslag welded, and fabricated from special steel: max 0.08% C, 0.5% Mn, max 0.02% P, max 0.02% S, traces of Si. And made of U-forms center sections with pre-welded pressed ends to the internal dimensions mentioned above.

Currently, we need to have a replacement to the existing kettle, as it has been installed for 7 years. The size of the kettle is 7.00m x 1.2m x 3.2m, and wall thickness is 60mm. It should be ultrasonically tested, automatically electroslag welded, and fabricated from special steel: max 0.08% C, 0.5% Mn, max 0.02% P, max 0.02% S, traces of Si. And made of U-forms center sections with pre-welded pressed ends to the internal dimensions mentioned above.

I am looking for kettle for hot dip galvanising with following specifications: made of U-formed center-section with pre-welded pressed ends to the internal dimensions detailed below: 9.00 mm length 1.50 mm width 2.50 mm depth 50 mm wall thickness welded at the top a flange 150 x 50 mm and two (2) sub-flange 25 x 12 mm (6 mm below the top) respectively 100 x 12 mm (200 mm below the top), including 24 studs for HASCO corner protection shields and 4 lifting lugs. kettle should be ultrasonic tested, automatically electroslag welded, fabricated from special plate with the following typical analysis: C 0.08% max, Mn 0.5% max, P 0.02% max, S 0.02% max & Si traces

Our company needs a galvanizing bath, can you make it?

Good afternoon! Interested in the supply of galvanizing bath. Are you a manufacturer of hot dip galvanizing equipment?